Nernst CR jerin lalata juriyar iskar oxygen binciken don ƙona sharar gida

Kewayon aikace-aikace

Jerin Nernst CR juriya lalataoxygenbincikeDon ƙona sharar gida ana amfani da shi kai tsaye don auna abun da ke cikin iskar oxygen a cikin iskar hayaƙi na injin incinerator, zafin zafin hayaƙin hayaki yana cikin kewayon 0 ° C ~ 900 ° C, kuma bututun kariya na waje shine aluminum oxide (corundum).

Saboda bututun iskar gas na sharar incinerator ya ƙunshi ƙaƙƙarfan abubuwan da suka dace da abubuwan acidic na fluorinated, wanda ke da lalata ga kayan ƙarfe, rayuwar sabis na binciken binciken oxygen na gabaɗaya gajeru ne.Nernst CR jerinoxygen bincikedon ƙonawa sharar gida ya karɓi sabuwar fasaha, a cikin ƙura mai ƙura, babban yanayi mai lalata, yanayin zafi mai zafi, ana iya saka shi kai tsaye cikin wurin aikin ma'aunin da ake buƙata. Daidaiton ma'aunin zai iya zama har zuwa 10.^-30iko,

binciken yana da saurin amsawa da sauri, lokacin amsa bai wuce miliyon 100 ba, juriya na lalata yana da ƙarfi, kuma juriyar abrasion yana da ƙarfi sosai.

Ƙididdiga da sigogi na fasaha

•Samfura: jerin CRoxygenbincikedomin sharar konewa

•Shell abu: Aluminum oxide (corundum)

•Aikace-aikacen zazzabi mai hayaƙi: kasa da 900°C

•Kula da yanayin zafi: Binciken yana da nasa hita don kiyaye yawan zafin jiki na zirconium.

•Thermocouple: Nau'in K

•Lokacin dumama: kamar minti 15 zuwa 30 don isa ga zafin da aka ƙididdige na 700 ° C.(Yana da alaƙa da zazzabin hayaƙi)

•Shigarwa da haɗi: Binciken ya zo da zaren 1.5 ″ BSP ko NPT.Mai amfani zai iya aiwatar da madaidaicin flange na bangon tander bisa ga zanen da aka haɗe a cikin littafin koyarwa.

• Maganar gas: Tushen iskar gas a cikin mai nazari yana ba da kusan 50 ml / min.Yi amfani da iskar gas don kayan aiki kuma samar da iskar gas ta hanyar matsi mai rage bawul da mitar kwararar ruwa da mai amfani ya samar.Mai sana'anta yana ba da bututun haɗin PVC daga na'urar kwarara mai iyo zuwa firikwensin da mai haɗawa a ƙarshen firikwensin tare da mai watsawa.

•Bututun haɗin gas: PVC bututu tare da diamita na waje na 1/4 "(6.4mm) da diamita na ciki na 4 (mm).

•Duba haɗin gas: Na'urar firikwensin yana da mashigan iska wanda zai iya wuce gas duba.Lokacin da ba a duba ba, ana rufe shi da babban kanti.Lokacin daidaita iska, ana sarrafa yawan kwararar ruwa a kusan 1000 ml a minti daya.Mai sana'anta yana samar da 1/8 ″ NPT masu haɗin bututu wanda za'a iya haɗa shi da bututun PVC.

•Rayuwar baturi na Zirconium: 4-6 shekaru na ci gaba da aiki.Ya dogara da abun da ke tattare da bututun hayaki da zazzabi.Yin aiki na wucin gadi zai shafi rayuwar sabis, kuma ya kamata a ci gaba da ci gaba da yin dumama.

•Lokacin amsawa: kasa da 4 seconds

• Tace: Bakin karfe mai motsi nau'in.Tace diamita na waje ￠42 (mm)

• Binciken kariyar bututu na waje diamita￠42 (mm)

•Binciken junction akwatin zafin jiki: <130°C

•Binciken haɗin lantarki: nau'in soket na toshe kai tsaye ko soket ɗin filogi na jirgin sama.

• Nauyi: 1.5Kg da 0.65Kg/100mm tsayi.

•Daidaitawa: Bayan shigarwa na farko na tsarin ya tabbata, yana buƙatar dubawa sau ɗaya.

•Tsawon: